国际标准  

发布12项：

[12] ISO/TS 23690:2023 Nanotechnologies – Multiwall carbon nanotubes – Determination of carbon impurity content by thermogravimetric analysis

[11] IECTS 62607-6-21:2022 Nanomanufacturing – Key control characteristics – Part 6-21: Graphene-based material – Elemental composition, C/O ratio: X-ray photoelectron spectroscopy

[10] IECTS 62607-6-20:2022 Nanomanufacturing – Key control characteristics – Part 6-20: Graphene-based material – Metallic impurity content: Inductively coupled plasma mass spectrometry

[9]  ISO/TS 19807-2:2021 Nanotechnologies – Magnetic nanomaterials – Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction

[8]  ISO/TS 23362:2020 Nanotechnologies –Nanostructured porous alumina for catalyst support of vehicle exhaust control - Specification of characteristics and measurement methods

[7]  IEC TS 62607-3-3:2020 Nanomanufacturing-Key control characteristics – Part 3-3: Luminescent nanomaterials – Determination of fluorescence lifetime of semiconductor quantum dots using time correlated single photon couting (TCSPC)

[6]  IEC TS 62607-4-8:2020 Nanomanufacturing-Key control characteristics – Part 4-8: Nano-enabled electrical energy storage – Determination of water content in electrode nanomaterials, Karl Fischer method

[5]  IEC TS 62607-4-7: 2018    Nanomanufacturing-Key control characteristics – Part 4-7：Nano-enabled electrical energy storage - Determination of magnetic impurities in anode nanomaterials, ICP-OES method  

[4]  IEC TS 62607-4-6: 2018   Nanomanufacturing-Key control characteristics – Part 4-6：Nano-enabled electrical energy storage - Determination of carbon content for nano-enabled electrode materials, infrared absorption method

[3]  IEC/TS 62607-4-2: 2016  Nanomanufacturing-Key control characteristics – Part 4-2: Nano-enabled electrical energy storage devices – Physical characterization of cathode nanomaterials, density measurement 

[2]  ISO 18473-1: 2015  Functional pigments and extenders for special applications – Part 1: Nanoscale calcium carbonate for sealant application 

[1]  ISO/TS 17466: 2015  Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots    

国家标准 

发布34项：

[34]《纳米制造 关键控制特性 纳米储能 第3部分：纳米材料接触电阻率和涂层电阻率的测试》，GB/T 41232.3-2023

[33]《纳米技术 纤维素纳米晶的表征方法》，GB/T 43263-2023

[32]《纳米技术 纳米光电显示 量子点光转换膜光学性能测试方法》，GB/T 42976-2023

[31]《纳米技术 纳米光电显示 量子点光转换膜的光学可靠性测定》，GB/T 42977-2023

[30]《纳米技术 石墨烯粉体氧含量和碳氧比的测定 X射线光电子能谱法》，GB/T 43598-2023

[29]《纳米技术 石墨烯粉体比表面积的测定 氩气吸附静态容量法》，GB/T 42310-2023

[28]《微细气泡技术 测量取样及样品制备 第1部分：超细气泡水分散体系》，GB/T 42843.1-2023

[27]《微细气泡技术 微气泡的表征 第1部分：粒径指数的离线评估》，GB/T 42845.1-2023

[26]《纳米技术 水相中无机纳米颗粒的尺寸分布和浓度测量 单颗粒电感耦合等离子质谱仪》，GB/T 42732-2023

[25]《纳米技术 石墨烯粉体中金属杂质的测定 电感耦合等离子体质谱法》，GB/T 42240-2022

[24]《电工术语 纳米技术电子产品和系统》，GB/T 2990.105-2022

[23]《微细气泡技术 微细气泡使用和测量通则 第1部分：术语》，GB/T 41914.1-2022

[22]《纳米制造 关键控制特性 纳米储能 第2部分：纳米正极材料的密度测试》，GB/T 41232.2-2021

[21]《纳米技术 多壁碳纳米管的表征 介观形状因子》，GB/T 40568-2021

[20]《纳米技术 镉硫族化物胶体量子点表征 紫外-可见吸收光谱法》，GB/T 24370-2021

[19]《纳米技术 纳米物体表征用测量技术矩阵》，GB/T 41204-2021

[18]《纳米技术工程纳米材料的职业风险管理第2部分：控制分级方法应用》，GB/T 36082-2018 

[17]《纳米制造关键控制特性发光纳米材料第1部分：量子效率》，GB/T 37664.1-2019

[16]《纳米技术材料规范纳米物体特性指南》，GB/T 37156-2018 

[15]《纳米技术半导体纳米粉体材料紫外-可见漫反射光谱的测试方法》，GB/T 37131-2018

[14]《纳米技术纳米材料风险评估》，GB/T 37129-2018